+86 574-6319 6918 Building 32, Zone B, Wanyang Mass Creation City, Henghe Town, Cixi, Ningbo, China.

Bearing Knowledge

Knowledge Center

Notes on Bearing Use

Notes on Bearing Use

Rolling bearings are precision components and must be handled with great care. Even high-quality bearings will not perform as expected if used improperly. The main precautions for bearings are as follows: (1) Keep the bearing and its surrounding environment clean. Tiny dust particles invisible to the naked eye can adversely affect the bearing. Therefore, keep the surrounding area clean to stop dust from

2026-10-23 10:00:00 Views 211 times
Characteristics of Deep Groove Ball Bearings

Characteristics of Deep Groove Ball Bearings

## Definition of Clearance Bearing clearance refers to the maximum movement of one ring relative to the other when one ring is fixed. The maximum radial movement is called radial clearance, and the maximum axial movement is called axial clearance. In nearly all applications, the initial clearance of a bearing is larger than its operating clearance. This difference mainly arises from two factors: 1. Bearings are normally mounted on shafts or housings with an interference fit.

2026-10-07 10:00:00 Views 220 times
Bearing Cage (Figure)

Bearing Cage (Figure)

轴承保持架,又称轴承保持器,是轴承的主要零件之一。其作用是包裹并隔离滚动体并随之运动,通常还具有引导滚动体作用。保持架的主要作用1、使滚动体间保持适当距离,防止滚动体相互接触以减少摩擦;2、使滚动体均匀分布,从而让载荷均匀分布;3、在无载荷区引导滚动体,以改善轴承中滚动条件,防止出现有损坏性滑动。保持架要承受因摩擦、应变和惯性力引起的应力,还要承受润滑剂、润

2026-09-10 10:00:00 Views 217 times
Key Factors for Rolling Bearing Selection

Key Factors for Rolling Bearing Selection

Bearings of various types have different characteristics due to their different designs. Considering the variability and complexity of bearing mounting positions and application scenarios, there is no fixed rule for bearing type selection. When selecting bearings to match the specific mounting position and operating conditions of a host machine, it is recommended to make a comprehensive evaluation based on the following key factors.

2026-08-19 10:00:00 Views 211 times
Basic Structure and Classification of Deep Groove Ball Bearings

Basic Structure and Classification of Deep Groove Ball Bearings

Bearings for household motors are a type of bearing specially designed for home appliances. Their main function is to support rotating parts inside electrical appliances, reduce the friction coefficient during operation and guarantee rotational accuracy. Due to diverse customer requirements and different performance expectations for household motor bearings, the precision grades of home appliance motor bearings supplied by various manufacturers vary.............

2026-07-20 10:00:00 Views 205 times
Importance of Bearing Cage

Importance of Bearing Cage

What is a bearing cage? A bearing cage is a bearing component that partially encloses all or part of the rolling elements and moves along with them. It is mainly used to separate the rolling elements. Usually, it also properly guides the rolling elements and keeps them retained inside the bearing........

2026-06-15 10:00:00 Views 204 times
Operating Principle, Advantages and Disadvantages of Deep Groove Ball Bearings

Operating Principle, Advantages and Disadvantages of Deep Groove Ball Bearings

#### What is Bearing Clearance? Bearing clearance refers to the internal clearance (or interference) within a single bearing or within a system composed of multiple bearings. Clearance is divided into radial clearance and axial clearance. Radial clearance is the movement amount of the outer ring in the vertical direction when the inner ring is fixed......

2026-05-21 10:00:00 Views 215 times
Release of New National Standards for Rolling Bearings

Release of New National Standards for Rolling Bearings

# Release of New National Standards for Rolling Bearings On November 19, 2020, the Standardization Administration of China approved and issued 586 national standards via Announcement No. 26 of 2020 of the National Standards of the People's Republic of China, including six standards for the rolling bearing industry. The standard number, standard title, replaced standard and implementation date are listed below......

2026-04-16 10:00:00 Views 203 times
Principle and Application Range of Deep Groove Ball Bearings

Principle and Application Range of Deep Groove Ball Bearings

Koyo’s K-series ball bearings are ultra-thin wall bearings. Characterized by light weight and thin cross-section, they are widely used in industrial robots and other automated, labor-saving equipment. Products of this type are grouped by cross-sectional dimensions. Within the same series, the cross-section remains constant regardless of the bore size. Take a look at the appearance of these bearings; they look as delicate as a graceful fairy. See the figure below.........

2026-03-18 10:00:00 Views 205 times
Deep Groove Ball Bearings: A Comprehensive Guide to Selecting the Right Bearing

Deep Groove Ball Bearings: A Comprehensive Guide to Selecting the Right Bearing

We will introduce the process of extending the service life of ball bearings used in passenger car transmissions as an example: (1) Problem Statement Ball bearings widely used in passenger car transmissions previously exhibited shorter actual service life than the rated life calculated by standard methods, with premature fatigue spalling and high noise. Bearings used at other positions of the passenger car achieved service life longer than the rated life............

2026-02-22 10:00:00 Views 201 times
  • Page 1 of 2
  • <
  • 1
  • 2
  • >